Here are several production methods for calcium stearate

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



It is a common saturated long-chain fatty acid. The hydrophilic carboxyl group and the lipophilic carbon chain end are both present in the stearic acid. The surface is hydrophilic of the nano-calcium carbonate, so it is coated with stearic acids to increase its lipophilicity. The large surface area of the calcium carbonate and its high specific energy can be beneficial when it is used in rubber, plastics or advanced inks. The bond between the two can enhance the performance of the product and make it brighter.
The powdered calcium stearate comes in a white color. It is insoluble with water, cold alcohol and ether. But it is soluble with organic solvents, such as hot benzene. It is combustible, and it decomposes very slowly at 400degC. If a strong acid is used, it will decompose into stearic acids and the calcium salt.

Calcium stearate can be produced in four different ways

1. The synthesis is calcium stearate. The calcium chloride with a concentration of 1074kg/m3 (also known as 10degBe), is added to the sodium-stearate solution, and the metathesis reactions are carried out at approximately 65degC. Precipitation separates the calcium stearate. The final product is obtained after it has been filtered, cleaned with water and dried around 90degC.

2. In 300mL hot water, add 5.60g of calcium oxide (0.1mol). Pour 51.3g of chemically-pure stearic acids in 350mL at 70°C hot water, and add 0.75g to diethanolamine. Stir it up to emulsify. The prepared stearic-acid emulsion is added to the suspension of calcium oxide within 2h and thoroughly stirred. After that, the white, insoluble calcium stearate formed was filtered and dried.

3. The catalyst H2O2 is added slowly under constant stirring to the reaction pot. The reaction lasts 1.52.0h. The reaction is complete when the material has been discharged, cooled, and crushed.

4. Metathesis method – dissolve stearic acids in hot water 20 times their mass, add caustic soda saturated solution, and perform saponification reactions at around 75degC. You will get dilute sodium stearate. Then, the sodium stearate and calcium chloride solutions were mixed together. Metathesis was then carried out around 65 degrees Celsius, resulting in the precipitation of calcium stearate. The final product is obtained after it has been filtered, washed in water and dried around 90degC.
(also called Technology Co. Ltd.) has been a leading global chemical supplier and producer for over 12 years. They specialize in the production of ultra-high grade chemicals and nanomaterials. Our company produces different stearics acids such as lead stearates, aluminum stearates, magnesium stearates, calcium stearates, etc. If you have any questions, please contact us.