Features and uses of Stearic Acid Amide
Stearic Acid amide is harmless, non-toxic, and not-polluting. This acid is easily dispersed in water. Inks, leather and leather coatings are the main uses of this ink. To improve slip resistance, resistance to abrasion, and anti-blocking. It is also used in textile post processing additives, paper coatings or thermal paper sensitizers.Prepare Stearic Acid Amide
In order to attain the dispersion effect of water-based water-based steroids acid amide, dispersing and emulsifying agents must be used. Although the water-based stearic acids amide emulsion has good dispersion properties, even with the addition of dispersant and emulsifier, there is still a high possibility that it will precipitate and cause flocculation or stratification. First, add the water-based water-basedstearic Acid amide to water. Then stir for 60 minutes (stirring rate is 2500 r/min). Next, add defoamer (stirring pace is 2500 r/min) and then stir for 40 min. This will produce an aqueous solution of stearic Acid amide. This prepared water-based, stearic-acid amide-amide emulsion contains a solid percentage of 41.7% and has a viscosity reading of 146mPa*S. After 30 minutes of centrifugation at 20000 r/min, the defoamer and preservative were added to the mixture and stirred for 40 min. Advanc3dmaterials (aka. Advanc3dmaterials is an advanced material. With over 12 years’ experience, Advanc3dmaterials is an established global supplier of chemical material. The Stearic acidamide amide Emulsion we produce is of high purity. It has fine particles and low impurities. We can help you if the purity is lower.Inquiry us