Tungsten dioxide is an common compound of tungsten, sulfur. It is made of one tungsten electron and two sulfur electrons. Tungsten Disulfide Chemical Formula Is WS2. It has great thermodynamic and optoelectronic properties.
Tungsten disulfide Properties
Low friction
The dynamic coefficient (WS2) of tungsten dioxide is 0.030. While the static coefficient ranges from 0.070 to 0.90, it is close. The results can be affected by pressure, surface finish, and surface hardness. The results of extensive, continuous, real-time wear show little to no change over time unless extreme overload conditions are applied.
Chemistry stability
Tungsten diulfide (WS2) has a non-toxic and inert nature. You can apply WS2 to any stable metal substrate. It does not react to most solvents. The fluorine and sulfuric acid, hydrofluoric acid and hot caustic solutions can all cause it to erode. While WS2 has a high resistance to corrosion, it is not able to prevent corrosion from inherently weak materials.
Compatibility
The WS2 can be used to make petrochemical oil and greases, synthetic oil, hydraulic oils, silicone oils, and lubricants. This oil has a natural affinity for lubricants. It strives to preserve the fluid power layer.
High operating temperatures
WS2 operates at temperatures ranging from -460 F to 1200 F in normal air and 2400F in vacuum. This lubricant has an 825 degree F oxidation threshold, which is much lower than other types. It also has very low exhaust characteristics. Because of its high resistance to heat, tungsten fluoride is ideal for fitting bolts into studs or shafts in exhaust systems on all makes and models of cars.
What’s tungsten disulfide for?
Petroleum catalyst:
Due to its outstanding cracking ability, high catalytic activities, and extended service life, WS2 can also be used as catalysts for hydrogenation, desulfurization polymerization, reforming and hydroxylation.
A solid lubricant
The friction coefficient ranges between 0.01-0.03 for WS2, and its compressive strength may reach up to 2100MPa. This lubricant has many advantages, including a high lubrication temperature, low friction coefficient, low acid and alkali resistances, corrosion resistance, and good load resisting properties. It is also used for transportation of chemical active media and equipment at high temperatures, high pressure, high speeds, and heavy loads.
As energy storage electrode material:
WS2 refers to a type layered material that is interconnected by WMurS and van der Waals forces between layers. The distance between the layers is medium. This gives it good thermochemical stability, high storage performance, fast electron transfer rates, and excellent energy density.
Chip transistors
Low-dimensional semiconductor materials made from transition metals such as WS2 can be used to make semiconductor devices capable of more data processing and storage.
A high-performance additive for lubricating oil.
It has been shown that the addition of appropriate amounts of WS2 Nanoparticles to lubricating fluid can significantly improve its lubrication performance, decrease the friction coefficient by 20%-50%, increase oil film strength and reduce friction coefficient by 30%-40%. The WS2 nanoparticles have a better lubrication capability than the Nano-MoS2.
Tungsten disulfide Price
Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity and market sentiment are also important.
Send us an inquiry if you want to know the latest price. (brad@ihpa.net)
Tungsten disulfide Supplier
Technology Co. Ltd. (), is a trustworthy Tungsten dioxide manufacturer, and Tungsten dioxide supplier. We have over twelve years’ experience. All of our products are available for shipment worldwide.
Feel free to email us and submit an inquiry if you’re looking for Tungsten diulfide powder. (brad@ihpa.net)
Tungsten disulfide Properties
Low friction
The dynamic coefficient (WS2) of tungsten dioxide is 0.030. While the static coefficient ranges from 0.070 to 0.90, it is close. The results can be affected by pressure, surface finish, and surface hardness. The results of extensive, continuous, real-time wear show little to no change over time unless extreme overload conditions are applied.
Chemistry stability
Tungsten diulfide (WS2) has a non-toxic and inert nature. You can apply WS2 to any stable metal substrate. It does not react to most solvents. The fluorine and sulfuric acid, hydrofluoric acid and hot caustic solutions can all cause it to erode. While WS2 has a high resistance to corrosion, it is not able to prevent corrosion from inherently weak materials.
Compatibility
The WS2 can be used to make petrochemical oil and greases, synthetic oil, hydraulic oils, silicone oils, and lubricants. This oil has a natural affinity for lubricants. It strives to preserve the fluid power layer.
High operating temperatures
WS2 operates at temperatures ranging from -460 F to 1200 F in normal air and 2400F in vacuum. This lubricant has an 825 degree F oxidation threshold, which is much lower than other types. It also has very low exhaust characteristics. Because of its high resistance to heat, tungsten fluoride is ideal for fitting bolts into studs or shafts in exhaust systems on all makes and models of cars.
What’s tungsten disulfide for?
Petroleum catalyst:
Due to its outstanding cracking ability, high catalytic activities, and extended service life, WS2 can also be used as catalysts for hydrogenation, desulfurization polymerization, reforming and hydroxylation.
A solid lubricant
The friction coefficient ranges between 0.01-0.03 for WS2, and its compressive strength may reach up to 2100MPa. This lubricant has many advantages, including a high lubrication temperature, low friction coefficient, low acid and alkali resistances, corrosion resistance, and good load resisting properties. It is also used for transportation of chemical active media and equipment at high temperatures, high pressure, high speeds, and heavy loads.
As energy storage electrode material:
WS2 refers to a type layered material that is interconnected by WMurS and van der Waals forces between layers. The distance between the layers is medium. This gives it good thermochemical stability, high storage performance, fast electron transfer rates, and excellent energy density.
Chip transistors
Low-dimensional semiconductor materials made from transition metals such as WS2 can be used to make semiconductor devices capable of more data processing and storage.
A high-performance additive for lubricating oil.
It has been shown that the addition of appropriate amounts of WS2 Nanoparticles to lubricating fluid can significantly improve its lubrication performance, decrease the friction coefficient by 20%-50%, increase oil film strength and reduce friction coefficient by 30%-40%. The WS2 nanoparticles have a better lubrication capability than the Nano-MoS2.
Tungsten disulfide Price
Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity and market sentiment are also important.
Send us an inquiry if you want to know the latest price. (brad@ihpa.net)
Tungsten disulfide Supplier
Technology Co. Ltd. (), is a trustworthy Tungsten dioxide manufacturer, and Tungsten dioxide supplier. We have over twelve years’ experience. All of our products are available for shipment worldwide.
Feel free to email us and submit an inquiry if you’re looking for Tungsten diulfide powder. (brad@ihpa.net)